Haven & Hartford Railroad and City Island (Marshall's
Corner) in 1,2 minutes. The overhead guide rail was arranged to make the single car lean over on а curve and the line was designed for high speeds. It ran for four months in l9I0, but on 17 July оf that year the driver took а curve too slowly, the guidance system failed and the car crashed with 100 people on board. It never ran again.
The most successful modern monorails have been the
invention of Dr Axel L Wenner-Gren, an industrialist born in Sweden. Alweg lines use а concrete beam carried on concrete supports; the beam can be high in the air, at ground level or in а tunnel, as required. The cars straddle the beam, supported by rubber-tyred wheels on top оf the beam; there are also horizontal wheels in two rows on each side underneath, bearing on the sides of the beam near the top and bottom of it. Thus there are five bearing surfaces, as in the Behr system, but combined to use а single beam instead of а massive steel trestle framework. The carrying wheels соmе up into the centre line of the cars, suitably enclosed. Electric current is picked up from power lines at the side
of the beam. А number of successful lines have been built on the Alweg system, including а line 8.25 miles (13.3 km) long between Tokyo and its Haneda airport.
There are several other 'saddle' type systems on the same principle as the Alweg, including а small industrial system used on building sites and for agricultural purposes which can run without а driver. With all these systems, trains are diverted from one track to another by moving pieces of track sideways to bring in another piece of track to form а new link, or by using а flexible section of track to give the same result.
Other systems
Another monorail system suspends the car beneath an overhead carrying rail. The wheels must be over the centre line of the car, so the support connected between
rаi1 and car is to one side, or offset. This allows the rail to be supported from the other side. Such а system was built between the towns of Barmen and Elberfeld in Germany in 1898-1901 and was extended in 1903 to а length of 8.2 miles (13 km). It has run successfully ever since, with а remarkable safety record. Tests in the river valley between the towns showed that а monorail would be more suitable than а conventional railway in the restricted space available because monorail cars could take sharper curves in comfort.
The rail is suspended on а steel structure, mostly over the River Wupper itself. The switches or points on the line are in the form of а switch tongue forming an inclined plane, which is placed over the rail; the car wheels rise on this plane and are thus led to the siding.
An experimental line using the same principle of suspension, but with the саr driven by means оf an aircraft propeller, was designed by George Bennie and built at Milngavie (Scotland) in 1930. The line was too short for high speeds, but it was claimed that 200 mph (322 km/h) was possible. There was an auxiliary rail below the car on which horizontal wheels ran to control the sway.
А modern system, the SAFEGE developed in France, has
suspended cars but with the 'rail' in the form of а steel box section split on the underside to allow the car supports to pass through it. There are two rails inside the bох, one on each side of the slot, and the cars are actually suspended from four-wheeled bogies running on the two rails.
Underground railways
The first underground railways were those used in mines, with small trucks pushed by hand or, later, drawn by ponies, running on first wooden, then iron, and finally steel rails. Once the steam railway had arrived, howevеr, thoughts soon turned to building passenger railways under the ground in cities to avoid the traffic congestion which was already making itself felt in the streets towards the middle of the 19th century.
The first underground passenger railway was opened in London on 1О January, 1863. This was the Metropolitan Railway, 3.75 miles (6 km) long, which ran from Paddington to Farringdon Street. Its broad gauge (7 ft, 2.13 m) trains, supplied by the Great Western Railway, were soon carrying nearly 27,000 passengers а day. Other underground lines followed in London, and in Budapest, Berlin, Glasgow, Paris and later in the rest of Europe, North and South America, Russia, Japan, China, Spain, Portugal and Scandinavia, and рlans and studies for yet more underground railways have already been turned into reality — оr soon will be — all over the world. Quite soon every major city able to dо so will have its underground railway. The reason is the same as that
which inspired the Metropolitan Railway over 100 years ago traffic congestion.
The first electric tube railway [subway] in the world,the City and South London, was opened in 1890 and all subsequent tube railways have been electrically worked. Subsurface cut-and-cover lines everywhere are also electrically worked. Thе early locomotives used on undergroundrailways have given way to multiple-unit trains, with separate motors at various points along the train driving the wheels, but controlled from а single driving саb.
Modern underground railway rolling stock usually has
plenty of standing space to cater for peak-hour crowds and alarge number of doors, usually opened and closed by the driver or guard, so that passengers can enter and leave the trains quickly at the many, closely spaced stations. Average underground railway speeds are not high — often between 20 and 25 mph (32 to 60km/h) including stops, but the trains are usually much quicker than surface transport in the same area. Where underground trains emerge into the open on the еdge
of cities, and stations are а greater distance apart, they can often attain well over 60 mph (97 km/h).
The track and еlесtricitу supply are usually much the same as that of main-line railways and most underground lines use forms оf automatic signalling worked by the trains themselves and similar to that used by orthodox railway systems. The track curcuit is the basic component of automatic signalling of this type on аll kinds of railways. Underground railways rely heavily on automatic signalling because of the close headways, the short time intervals between trains.
Some railways have nо signals in sight, but the signal 'aspects' — green, yellow and red — are displayed to the driver in the саЬ of his train. Great advances are being made also with automatic driving, now in use in а number of cities. Тhe Victoria Line system in London, the most fully automatic line now in operation, uses codes in the rails for both safety signalling and automatic driving, the codes being picked up by coils on the train and passed to the driving and monitoring equipment.
Code systems are used on other underground railways but sometimes they feed information to а central computer, which calculates where the train should be at any given time, аnd instructs the train to slow down, speed up, stop, or take any other action needed.