real R_ka = sqrt(x*x+y*y+z*z);
real Fz_x = -mu_z*x/pow(R_ka,3.);
real Fz_y = -mu_z*y/pow(R_ka,3.);
real Fz_z = -mu_z*z/pow(R_ka,3.);
real mu_sd = p*sm_s*A*A/m;
real R_s = sqrt((x-xs)*(x-xs)+(y-ys)*(y-ys)+(z-zs)*(z-zs));
real Fs_x = -(mu_s-mu_sd)*x/pow(R_s,3.);
real Fs_y = -(mu_s-mu_sd)*y/pow(R_s,3.);
real Fs_z = -(mu_s-mu_sd)*z/pow(R_s,3.);
real R_l = sqrt((x-xl)*(x-xl)+(y-yl)*(y-yl)+(z-zl)*(z-zl));
real Fl_x = -mu_l*x/pow(R_l,3.);
real Fl_y = -mu_l*y/pow(R_l,3.);
real Fl_z = -mu_l*z/pow(R_l,3.);
real V_ka = sqrt(Vx*Vx+Vy*Vy+Vz*Vz);
real Fa_x = (-Cx*sm_a/(2*m))*ro*V_ka*Vx;
real Fa_y = (-Cx*sm_a/(2*m))*ro*V_ka*Vy;
real Fa_z = (-Cx*sm_a/(2*m))*ro*V_ka*Vz;
const real c20 = -1.09808e-3;
const real c22 = 5.74e-6;
const real d22 = -1.58e-6;
const real r_e = 6378137.;
real cr = mu_z*r_e*r_e/pow(R_ka,5);
real lr = 2*atan(y/x);
real mr = 3*(c22*cos(lr)+d22*sin(lr));
real U20_x = cr*x*(c20*(1.5-7.5*z*z/pow(R_ka,2))+mr*(5*z*z/pow(R_ka,2)-3));
real U20_y = cr*y*(c20*(1.5-7.5*z*z/pow(R_ka,2))+mr*(5*z*z/pow(R_ka,2)-3));
real U20_z = cr*z*(c20*(4.5-7.5*z*z/pow(R_ka,2))+5*mr*(z*z/pow(R_ka,2)-1));
dery[0] = Vx;
dery[1] = Vy;
dery[2] = Vz;
dery[3] = (Fz_x+U20_x+Fs_x+Fl_x+Fa_x+akor[0]);
dery[4] = (Fz_y+U20_y+Fs_y+Fl_y+Fa_y+akor[1]);
dery[5] = (Fz_z+U20_z+Fs_z+Fl_z+Fa_z+akor[2]);
Fz = sqrt(Fz_x*Fz_x+Fz_y*Fz_y+Fz_z*Fz_z);
Fs = sqrt(Fs_x*Fs_x+Fs_y*Fs_y+Fs_z*Fs_z);
Fl = sqrt(Fl_x*Fl_x+Fl_y*Fl_y+Fl_z*Fl_z);
Fa = sqrt(Fa_x*Fa_x+Fa_y*Fa_y+Fa_z*Fa_z);
U20 = sqrt(U20_x*U20_x+U20_y*U20_y+U20_z*U20_z);
parn[3] = parn[3]+w_s*t;
par_or(f,par);
korr(t,f,dery);
if ((u_last-par[7]) > 300*g_r)
Fl_u = 1;
u_last = par[7];
}
void korr(real& t, real *f, real *)
{
if (t > (Tkor+172800.))
{
if ((fabs(dl) > 0.1*g_r) && (!Fl_ka) && (!Fl_kp) && (!Fl_ki))
{
Fl_kp = 1;
Fl_ka = 0;
Fl_ki = 0;
cout << "Результат измерений накоплен" << '\n';
cout << "Необходима коррекция периода. dl=" << dl*r_g << "град." << '\n';
cout << "Период ном.=" << parn [6] << "Период тек.=" << par[6] << '\n';
cout << "Параметры орбиты" << '\n';
cout << " Rp = " << par[2]*(1-par[1]) << '\n';
cout << " Ra = " << par[2]*(1+par[1]) << '\n';
cout << " p = " << par[0] << '\n';
cout << " a = " << par[2] << " e = " << par[1] << "\n T = "
<< par[6] << " w = " << par[5]*r_g << " u = " << par[7]*r_g
<< '\n';
clrscr();
}
}
Fl_a = 0;
Fl_p = 0;
Fl_lu = 0;
real da;
if (par[5] > par[7])
da = fabs(par[5]-par[7]-M_PI);
else
da = fabs(par[5]-par[7]+M_PI);
if (da < .1*g_r)
{
Fl_a = 1;
}
if (fabs(par[5] - par[7]) < .1*g_r)
{
Fl_p = 1;
}
if (par[7] < .1*g_r )
{
Fl_lu = 1;
}
real Vk;
if (T_vd)
if (t >= (T_vd +20))
{
T_vd = 0;
akor[0] = 0;
akor[1] = 0;
akor[2] = 0;
cout << "Выкл.дв. \n t = " << t;
}
if (((Fl_kp && Fl_a) || (Fl_ka && Fl_p) || (Fl_ki && Fl_lu)) && (!T_vd))
{
cout << " \n Коррекция \n";
cout << "\n Начало t=" << t << "сек \n";
int sim;
if ((t-Tkor) < 2500)
{
cout << "Не корректировать!";
return;
}
Tkor = t;
real R_t = sqrt(f[0]*f[0]+f[1]*f[1]+f[2]*f[2]);
real V_t = sqrt(f[3]*f[3]+f[4]*f[4]+f[5]*f[5]);
real R_n = parn[0];
if (Fl_a)
{
dRa = R_t-R_n;
dRp = par[2]*(1-par[1])-R_n;
cout << "Апоцентр dRp:" << dRp << "м \n";
cout << "dRa:" << dRa << "м \n";
cout << "w=" << par[5]*r_g << "u=" << par[7]*r_g << '\n';
real l,ln;
l = -(w_z-w_s)*par[6];
ln = -(w_z-w_s)*parn[6];
dl = -(w_z-w_s)*(par[6]-parn[6]);
cout << "T=" << par[6] << "Тном=" << parn[6] << " T-Tном="
<< par[6]-parn[6] << '\n' << "l=" << l*r_g << "lном="
<< ln*r_g << "l-lном=" << (l-ln)*r_g << "dl=" << dl
<< '\n';
if (dRp > 0)
Sig_a = -1;
else
Sig_a = 1;
cout << "Знак ускорения:" << Sig_a << '\n';
clrscr();
real Rp = par[2]*(1-par[1]);
real Ra_p = par[2]*(1+par[1]);
real Rp_p2 = Rp;
real Ra_p2 = R_t;
cout << "Rp=" << Rp_p2 << "Ra=" << Ra_p2 << '\n';
cout << "Ra_p=" << Ra_p << "\n Rt=" << R_t << '\n';
if (fabs(Rp - R_n) < 500)
{
Fl_kp = 0;
Fl_ka = 1;
cout << "Закончить коррекцию в апоцентре \n" << "dRp=" << Rp-R_n
<< "dRa=" << dRa << "t=" << t << '\n';
cout << "Параметры орбиты: \n" << "Rp=" << par[2]*(1-par[1])
<< "Ra=" << par[2]*(1+par[1]) << "\n p=" << par[0]
<< "a=" << par[2] << "e=" << par[1] << "\n T="
<< par[6] << "w=" << par[5]*r_g << "u=" << par[7]*r_g
<< '\n';
cout << "Суммарный импульс для коррекции перицентра=" << dV_ps << '\n';
clrscr();
}
else
{
if (R_t > R_n)
{
Rp_p = R_n;
Ra_p = R_t;
a_p = (Ra_p+Rp_p)/2.;
e_p = 1-Rp_p/a_p;
p_p = a_p*(1-e_p*e_p);
Vk = sqrt(mu_z/p_p)*(1-e_p);
}
else
{
Rp_p = R_t;
Ra_p = R_n;
a_p = (Ra_p+Rp_p)/2.;
e_p = 1-Rp_p/a_p;
p_p = a_p*(1-e_p*e_p);
Vk = sqrt(mu_z/p_p)*(1+e_p);
}
real dV = Vk-V_t;
real dVmax = 20*25./m;
cout << "\n dVтреб=" << dV << "dVmax за 20 сек=" << dVmax;
if (fabs(dV) > dVmax)
{
akor[0] = Sig_a*(25./m)*f[3]/V_t;
akor[1] = Sig_a*(25./m)*f[4]/V_t;
akor[2] = Sig_a*(25./m)*f[5]/V_t;
cout << "\n dV=" << dV << "dVmax=" << dVmax;
cout << "\n Корректирующее ускорение:" << akor[0] << '\t' << akor[1]
<< '\t' << akor[2] << '\t' <<
sqrt(akor[0]*akor[0]+akor[1]*akor[1]+akor[2]*akor[2]) << '\n';
dV_ps = dV_ps+dVmax;
cout << "Суммарный импульс=" << dV_ps << '\n';
}
else
{
akor[0] = Sig_a*(fabs(dV)/dVmax)*(25./m)*f[3]/V_t;
akor[1] = Sig_a*(fabs(dV)/dVmax)*(25./m)*f[4]/V_t;
akor[2] = Sig_a*(fabs(dV)/dVmax)*(25./m)*f[5]/V_t;
cout << "\n dV=" << dV << "dVmax=" << dVmax;
cout << "\n Корректирующее ускорение:" << akor[0] << '\t' << akor[1]
<< '\t' << akor[2] << '\t' <<
sqrt(akor[0]*akor[0]+akor[1]*akor[1]+akor[2]*akor[2]) << '\n';
dV_ps = dV_ps+fabs(dV);
cout << "Суммарный импульс=" << dV_ps << '\n';
}
if (dVmax > fabs(dV))
{
dVmax = fabs(dV);
real Vk_r = Sig_a*dVmax+V_t;
real Ra_r = R_t;
real e_r = -(Vk_r*Vk_r*Ra_r/mu_z)+1;
real a_r = Ra_r/(1+e_r);
real p_r = a_r*(1-e_r*e_r);
real Rp_r = a_r*(1-e_r);
cout << "Параметры орбиты: \n" << " Rp_r = " << Rp_r
<< " Ra_r = " << Ra_r << "\n p_r = " << p_r << " a_r = "
<< a_r << " e_r = " << e_r << '\n';
}
else
{
real Vk_r = Sig_a*dVmax+V_t;
real Ra_r = R_t;
real e_r = -(Vk_r*Vk_r*Ra_r/mu_z)+1;
real a_r = Ra_r/(1+e_r);
real p_r = a_r*(1-e_r*e_r);
real Rp_r = a_r*(1-e_r);
cout << "Параметры орбиты: \n" << " Rp_r = " << Rp_r
<< " Ra_r = " << Ra_r << "\n p_r = " << p_r << " a_r = "
<< a_r << " e_r = " << e_r << '\n';
}
T_vd = t;
cout << "Вкл.дв. t=" << T_vd << '\n';
}
}
if (Fl_p)
{
dRp = R_t-R_n;
dRa = par[2]*(1+par[1])-R_n;
cout << " Перицентра - dRp:" << dRp << "м \n";
cout << "dRa:" << dRa << "м. \n";
cout << "w=" << par[5]*r_g << "u=" << par[7]*r_g << '\n';
real l,ln;
l = -(w_z-w_s)*par[6];
ln = -(w_z-w_s)*parn[6];
dl = -(w_z-w_s)*(par[6]-parn[6]);
cout << "T=" << par[6] << "Tном=" << parn[6] << "T-Tном="
<< par[6]-parn[6] << '\n' << "l=" << l*r_g << "lном="
<< ln*r_g << "l-lном=" << (l-ln)*r_g << "dl=" << dl << '\n';
if (dRa > 0)
Sig_a = -1;
else
Sig_a = 1;
cout << "Знак ускорения:" << Sig_a << '\n';
clrscr();
real Ra = par[2]*(1+par[1]);
real Rp_p1 = R_t;
real Ra_p1 = Ra;
cout << "Rp=" << Rp_p1 << "Ra=" << Ra_p1 << '\n';
if ((fabs(Ra-R_n) < 500) || (fabs(dl*r_g) < .0001))
{
cout << "Закончить коррекцию в перицентре \n" << "dRa="
<< Ra-R_n << "dRp=" << dRp << "t=" << t << '\n';
cout << "Параметры орбиты: \n " << "Rp="
<< par[2]*(1-par[1]) << "Ra=" << par[2]*(1+par[1])
<< " \n p=" << par[0] << "a=" << par[2] << "e="
<< par[1] << " \n T=" << par[6] << "w=" << par[5]*r_g
<< "u=" << par[7]*r_g << '\n';
cout << "Суммарный импульс для коррекции перицентра=" << dV_as << '\n';
clrscr();
Fl_ka = 0;
Fl_ki = 1;
}
else
{
if (R_t > R_n)
{
Rp_p = R_n;
Ra_p = R_t;
a_p = (Ra_p+Rp_p)/2.;
e_p = 1-Rp_p/a_p;
p_p = a_p*(1-e_p*e_p);
Vk = sqrt(mu_z/p_p)*(1-e_p);
}
else
{
Rp_p = R_t;
Ra_p = R_n;
a_p = (Ra_p+Rp_p)/2.;
e_p = 1-Rp_p/a_p;
p_p = a_p*(1-e_p*e_p);
Vk = sqrt(mu_z/p_p)*(1+e_p);
}
real dV = Vk-V_t;
real dVmax = 20*25./m;
cout << "\n dVнадо=" << dV << " dVmax за 20 сек=" << dVmax;
if (fabs(dV) > dVmax)
{
akor[0] = Sig_a*(25./m)*f[3]/V_t;
akor[1] = Sig_a*(25./m)*f[4]/V_t;
akor[2] = Sig_a*(25./m)*f[5]/V_t;
cout << "\n dV=" << dV << "dVmax=" << dVmax;
cout << "\n Корректирующее ускорение:" << akor[0] << '\t' << akor[1]
<< '\t' << akor[2] << '\t' <<
sqrt(akor[0]*akor[0]+akor[1]*akor[1]+akor[2]*akor[2]) << '\n';
dV_as = dV_as+dVmax;
cout << "Суммарный импульс=" << dV_as << '\n';
}
else
{
akor[0] = Sig_a*(fabs(dV)/dVmax)*(25./m)*f[3]/V_t;
akor[1] = Sig_a*(fabs(dV)/dVmax)*(25./m)*f[4]/V_t;
akor[2] = Sig_a*(fabs(dV)/dVmax)*(25./m)*f[5]/V_t;
cout << "\n dV=" << dV << " dVmax=" << dVmax;
cout << "\n Корректирующее ускорение:" << akor[0] << '\t' << akor[1]
<< '\t' << akor[2] << '\t' <<
sqrt(akor[0]*akor[0]+akor[1]*akor[1]+akor[2]*akor[2]) << '\n';
dV_as = dV_as+fabs(dV);
cout << "Суммарный импульс=" << dV_as << '\n';
}
if (dVmax > fabs(dV))
{
dVmax = fabs(dV);
real Vk_r = Sig_a*dVmax+V_t;
real Ra_r = R_t;
real e_r = -(Vk_r*Vk_r*Ra_r/mu_z)+1;
real a_r = Ra_r/(1+e_r);
real p_r = a_r*(1-e_r*e_r);
real Rp_r = a_r*(1-e_r);
cout << "Параметры орбиты: \n" << "Rp_r=" << Rp_r
<< "Ra_r=" << Ra_r << "\n p_r=" << p_r << "a_r="
<< a_r << "e_r=" << e_r << '\n';
}
else
{
real Vk_r = Sig_a*dVmax+V_t;
real Ra_r = R_t;
real e_r = -(Vk_r*Vk_r*Ra_r/mu_z)+1;
real a_r = Ra_r/(1+e_r);
real p_r = a_r*(1-e_r*e_r);
real Rp_r = a_r*(1-e_r);
cout << "Параметры орбиты: \n" << "Rp_r=" << Rp_r
<< "Ra_r=" << Ra_r << "\n p_r=" << p_r << "a_r="
<< a_r << "e_r=" << e_r << '\n';
}
T_vd = t;
cout << "Вкл.дв. t=" << T_vd << '\n';
}
}
if (Fl_lu)
{
real di = par[4]-parn[4];
cout << "Линия узлов - di: " << di*r_g << "град \n";
cout << "w=" << par[5]*r_g << "u=" << par[7]*r_g << '\n';
real l,ln;
l = -(w_z-w_s)*par[6];
ln = -(w_z-w_s)*parn[6];
dl = -(w_z-w_s)*(par[6]-parn[6]);
cout << "T=" << par[6] << "Tном=" << parn[6] << "T-Tном="
<< par[6]-parn[6] << '\n' << "l=" << l*r_g << "lном="
<< ln*r_g << "l-lном=" << (l-ln)*r_g << "dl=" << dl
<< "\n i=" << par[4]*r_g << "iном=" << parn[4]*r_g << '\n';
cout << "Параметры орбиты: \n " << "Rp="
<< par[2]*(1-par[1]) << "Ra=" << par[2]*(1+par[1])
<< " \n p=" << par[0] << "a=" << par[2] << "e="
<< par[1] << " \n T=" << par[6] << "w=" << par[5]*r_g
<< "u=" << par[7]*r_g << " \n i=" << par[4]*r_g << '\n';
clrscr();
real Vk_x,Vk_y,Vk_z;
if (fabs(di) < .0001*g_r)
{
Fl_ki = 0;
cout << "Закончить коррекцию наклонения \n "
<< "di=" << (par[4]-parn[4])*r_g << "t=" << t << '\n';
cout << "Параметры орбиты: \n " << "Rp="
<< par[2]*(1-par[1]) << "Ra=" << par[2]*(1+par[1])