Смекни!
smekni.com

Quality of life and management of living resources (стр. 5 из 6)

1 Different rules apply for the specific programme ‘Confirming the international role of Community research’ (except for Associated States)and the EURATOM Framework Programme

2 According to Swiss authorities, this association agreement could enter into force on the 1st of January 2001 at the earliest. Meanwhile, Swiss legal entities shall be considered as those of any other third European country.

3 An association agreement with Malta is foreseen to be negotiated in 2000. Should this agreement be concluded, the status of Associated State shall take precedence over any other. Meanwhile, Maltese research entities participate to the activities of FP5 as “other European”. They are also shown under Mediterranean Partnership. For latest news, www.cordis.lu/fp5/src/3rdcountries.htm.

4 Turkish research entities participate to the activities of FP5 as “other European”. They are also shown under Mediterranean Partnership. For latest news, www.cordis.lu/fp5/src/3rdcountries.htm.

5 Andorra, Monaco, San Marino, Vatican City State (Holy See), Faeroe Islands (DK), Channel Islands (GB), Isle of Man (GB), Svalbard and Jan Mayen Islands (NO).

6 In the case of a country becoming associated to FP-5, that status takes precedence over any other

7 Community funding may also be granted if it is foreseen to use the facilities of an international organisation that are based in a third country, should this use be essential for achieving the objectives of the project.


Box 5 - Main milestones of the selection process

Quality of life and management of living resources

BOX 6 – Indicative Typology of Contracts

PARTICIPANT CONTRIBUTION DIRECT COSTS INDIRECT COSTS
Principal Contractor Assistant contractor Member Calculation Method * Percentage funding Personnel Durable equipment Subcontracting Travel and subsistence Consumables Computing Protection of knowledge Other specific costs Co-ordination costs Access RTD performer Overheads
SHARED COST ACTIONS7
R&D project min 2 yes

FC, FF

and AC

FC, FF: 50%

AC: 100%

Yes yes yes yes yes yes yes yes yes

FC: (actual rate)x(personnel)

FF: 80%x(personnel)

AC: 20%1

Combined project

FC, FF: 35 or 50%

AC: 100%

Demonstration project

FC, FF: 35%

AC: 100%

Support for access to research infrastructures 1 AC Up to 100% yes yes yes yes yes yes 20%1
UF Up to 100% yes yes
SME co-operative (CRAFT) min 3 SME FC, FF 50% yes yes yes yes yes yes yes yes (actual rate)x(personnel)
Exploratory awards min 2 SME Fixed amount 75%2
TRAINING FELLOWSHIPS
Marie Curie Host Fellowships institution min 1 fellow Fixed amount
Marie Curie Individual Fellowships 1 fellow
Developing countries Fellowships 1 fellow
Fellowships for Community Researchers fellow
SUPPORT TO NETWORK
Thematic network min 1 yes AC Up to 100% yes yes yes yes Yes 20%1
Training network 1 min. 4 AC Up to 100% Yes 20%1
CONCERTED ACTIONS min 1 yes AC Up to 100% yes yes yes yes yes 20%1
ACCOMPANYING MEASURES
Accompanying measures 3 min 1 Up to 100% yes yes yes yes yes yes Yes yes yes yes5
Euro conference 1 Up to 100% yes yes yes yes yes4 yes None
Technology Take-up min 1 yes Up to 100% yes yes yes yes yes yes yes yes yes yes6

* FC = Full Costs/ FF= Full costs Fixed rate/AC= Additional Costs/ UF = User Fee. For more information, see Box 7.

1 Direct costs, excluding subcontracting costs

2 Up to maximum of €22,500

3 For subsidies, see the Vademecum on grant management and com pv(98) 1395

4 Organisation costs (see specific Guide for Proposers Part 2)

5 Overhead is calculated as a lump sum of the personnel costs (not exceeding 80%).

6 The eligible cost categories for each of the types of technology take-up measures are referred to in the relevant Guide for Proposers, Part 2

7 Two alternative contracts are available respectively to the R&D and the Demonstration. One is the “Deliverables”, by which the contribution is paid in pre-set amounts and adjusted with the final payment on the basis of actual costs for the whole contract. The other is the “flat rate” (for projects estimated less than 100 000 euro) by which the contribution consists of a fixed amount based on the estimated costs for the work.


Box 7 - Methods for the calculation of EC funding

Full cost (FC)

The participant can identify all the direct and indirect costs related to the project. He should be able to demonstrate that his accounting system enables the identification of those costs with sufficient precision. FC = total direct costs + actual overhead rate.

Full costs Flat rate (FF)

The participant who may participate on a full costs basis or who can identify his direct costs related to the project (temporary and permanent staff) but not the indirect costs linked to the project may elect the overhead to be charged on a flat rate basis, 80 % of the direct personnel cost.

Additional cost (AC) - in R&D projects

Subject to the specific contract terms, the Commission shall only take into account the project’s additional (non recurrent) costs. AC = total direct additional costs + x% overhead on direct costs (excluding subcontracting) (for x% see Box 6).

Additional cost (AC) - in Concerted Actions/Thematic networks and Euroconferences

The Community funding shall only cover the direct costs necessary for the action, however, costs for permanent staff are eligible if time records are kept. AC = total direct additional costs + x% overhead on direct costs (excluding subcontracting) (for x% see Box 6).

User Fee (UF)

This system is only used in the context of projects providing access to research infrastructure. It is based on a "unit cost", which is a fixed composite rate, for each access. Travel and subsistence costs and a flat rate contribution for general expenses are added. The participant should be able to demonstrate that his accounting system enables him to calculate with sufficient precision the "unit cost". UF = ((unit cost x quantity of access) + travel and subsistence costs) + 20% overhead.

Costs categories

A cost shall be considered as eligible only where it is necessary for and during the project and is provided for in the contract. It shall be reimbursed if the amount has actually been spent and recorded in the accounts. No profit may be included.

Personnel costs: subject to the contract terms, scientific and technical personnel; time devoted to the project shall be recorded.

Durable equipment: subject to the contract terms, equipment shall be reimbursed according to a depreciation period (for computer equipment that cost less than 25.000 Euro the depreciation period is 36 months, for all other equipment the depreciation period is 60 months) and its use on the project; equipment leased shall be reimbursed without exceeding the eligible cost if it were to bepurchased.

Subcontracting: external services.

Travel and subsistence: travel outside the European Union or an Associated State needs the prior approval of the Commission, except for visiting a participant.

Consumables: only project specific items.

Computing: only project specific items.

Protection of knowledge: subject to contract terms, only with prior approval of the Commission

Other specific costs any cost necessary for the project, not falling within a defined category and having received the priorapproval of the Commission

Co-ordination costs: costs for the financial/administrative administration (personnel, travel and all other cost categories apart from subcontracting) incurred only by theco-ordinator - the financial/administrative co-ordinator in case of split between scientific and administrative co-ordinator - in order to fulfil his tasks.

Access: only for Support for access to research infrastructure; user fee related to visiting scientist.

RTD performer only for SME co-operative research project; cost of research performed by a non-participant.

Overheads: subject to the contract terms, either an actual rate (FC), or a flatrate (FF)calculated on personnelcosts or on the direct additional costs (AC) excluding subcontracting, or as a lump sum of personnel costs (Accompanying Measures).

BOX 8 - Intellectual Property Rights

The following table lists the access rights (license on a patent, other users rights) to knowledge (intellectual property created during the project) and know-how (pre-existing intellectual property) as a function of the different types of actions and participants.

Knowledge Pre-existing know-how necessary for the execution of the project or to use its Knowledge
Access rights for the execution of the project Use* Access rights for the execution of project Use
Research and technological development Project Principal Contractor Royalty-free Royalty-free (1) to all knowledge Favourable conditions Favourable conditions
Assistant Contractor (2) Royalty-free / Favourable Conditions

Favourable Conditions/

Market conditions

(1)

Favourable Conditions/ Market conditions /
Principal Contractor of the same specific programme Favourable Conditions Market conditions
Demonstration Project Principal Contractor Royalty-free Favourable Conditions for Exploitation only, to all knowledge Favourable conditions Favourable conditions for Exploitation only
Assistant Contractor (2) Royalty-free / Favourable Conditions

Favourable Conditions/ Market conditions

for Exploitation only

Favourable Conditions/ Market conditions /

Combined R&D/

Demonstration Project

Principal Contractor

In general, IPR rules for R&D projects shall be applied to R&D workpackages, and IPR rules for Demonstration projects to Demonstration workpackages.

If the identification of the various workpackages is impossible, IPR rules for R&D projects shall apply if the total EC contribution to the project as a whole is superior to 42,5% of its total cost. If the figure is equal or inferior to 42,5%, IPR rules for Demonstration projects shall then be applied.

Assistant Contractor (2)
SME co-operative Research Project Principal Contractor (SME) Co-ownership (3)

Co-ownership (3)

for Exploitation only

Royalty-free Favourable Conditions for Exploitation only

RTD

performer

(non- participant)

Royalty-free Royalty-free
Concerted Action Principal Contractor The knowledge which is suitable for dissemination will be disseminated
Member
Networks Principal Contractor The knowledge which is suitable for dissemination will be disseminated
Member
Fellowships Host Institution The ownership of knowledge will be determined by the Host Institution according to the applicable law. The knowledge which is suitable for dissemination will be disseminated
Grant holder
Accompanying Measures

Principal Contractor

& in particular cases Members

The ownership of knowledge will be determined regarding to the Community financing level. As the case may be, use or dissemination will prevail.

(*) Access rights to knowledge for the purpose of use are limited to knowledge generated under the project concerned.

(1) Contractors and Assistant Contractors unable to exploit their own knowledge might grant access rights at reasonable financial or similar conditions, instead of royalty-free.

(2) More favourable conditions when beneficiary requests access from its principal contractor or the other assistant contractors of the latter.

(3) SME Contractors are the owners of all knowledge resulting from the research work carried out by the RTD performers.

Box 9 - Key recommendations

- Eligible partners: Check first that you and your partners are eligible for participation in the Programme (for example: your organisation must have a registered legal existence, there are minimum consortium conditions etc.) and also that you are eligible for the particular activity involved (some activities may be reserved e.g. for SMEs, organisations in particular sectors of industry….etc.)